Injection Molded Letters Formed Plastic Letters Cut Plastic Letters Changeable Copy Channel Letters Cast Metal Letters Cut Metal Letters Laminated Letters Fabricated Metal Letters Cast Metal and Etched Plaques Installation Guides & Videos Supplies & Mounting Hardware Yard Signs

Formed Plastic Sign Letters Mounting Options

Formed Plastic Sign Letters Plain MountingPlain Mounting

Plain Mount Formed Plastic Sign Letters are shipped without mounting hardware.


Formed Plastic Sign Letters Flange MountingFlange Mounting

Flange is a flat, 3/16″ to 1/2″ perimeter on the Formed Plastic Letter return into which holes can be drilled. Secure with screws or nails. Wider flange available upon request. Not recommended for letters under 6″.


Formed Plastic Sign Letters Stud MountingStud Mounting

Studs are metal threaded posts on the rear of the Formed Plastic Sign Letters. Specify stud lengths of 1″, 1-1/2″, 2″, 3″, 4″, 5″ and 6″. Specify if studs need to be in line for brick or block wall mortar joints. (Brick — 2-5/8″ on center; block — 8″ on center.)


Formed Plastic Sign Letters Pad MountingPad Mounting

Pads are plastic disks on the rear of the Formed Plastic Sign Letters. Secure the Formed Plastic Letters to the wall with silicone adhesive. Adjustable or flush pads available upon request. Pad mount only recommended on letters less than 24″ tall.


Formed Plastic Sign Letters Stud Pad Combo MountingStud/Pad Combo Mounting

Combinations have pads at the bottom and pad/stud combinations at the top of the Formed Plastic Sign Letters. Specify if studs need to be in line for brick or block wall mortar joints. (Brick — 2-5/8″ on center; block — 8″ on center.) Not for letters under 6″.


Formed Plastic Sign Letters Stud Pad Combo Mounting AllStud/Pad Combo Mounting All

Combination – All Formed Plastic Sign Letters have stud through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6″.


Alternative Formed Plastic Installations

Formed Plastic Sign Letters Outside BracketOutside Bracket

Brackets are L-shaped Plastic projections flared outward from the back of the Formed Plastic Sign Letters.


Formed Plastic Sign Letters  Wire MountingWire Mounting

Wires are stainless steel hooks inserted into plastic blocks glued to inside of Formed Plastic Sign Letters.

Available for flush mounting or with 1/2″, 1″, 1-1/2″ or 2″ standoffs on flat faced letters 6″ and up.


Formed Plastic Sign Letters  Free StandingFree Standing

Free Standing Formed Plastic Sign Letters have 90 degree mounting brackets for installing on roofs. Other angles available upon request. Price is 3 times price listed.


Formed Plastic Sign Letters  Foam FilledFoam Filled

Foam Filled Formed Plastic Sign Letters are filled with rigid urethane foam and cut flush to the back edge of the letter.

Available for letters 9″ and smaller. Price is 3 times price listed.